If you have a web site or maybe an web app, rate of operation is extremely important. The swifter your site functions and the speedier your applications operate, the better for you. Because a web site is a selection of files that connect to one another, the devices that keep and access these data files play an important role in site operation.

Hard disk drives, or HDDs, have been, until the past few years, the most trusted devices for keeping data. Having said that, in recent years solid–state drives, or SSDs, are already becoming popular. Check out our comparability chart to determine if HDDs or SSDs are more effective for you.

1. Access Time

Image

After the arrival of SSD drives, data accessibility rates are now through the roof. Due to the unique electronic interfaces used in SSD drives, the regular data access time has shrunk into a all–time low of 0.1millisecond.

Image

HDD drives depend on spinning disks for data storage applications. Every time a file will be accessed, you need to wait around for the right disk to get to the appropriate place for the laser to access the data file involved. This results in an average access speed of 5 to 8 milliseconds.

2. Random I/O Performance

Image

Because of the very same radical technique which allows for faster access times, you may as well appreciate much better I/O efficiency with SSD drives. They’re able to complete double the procedures throughout a given time as compared with an HDD drive.

An SSD can handle a minimum of 6000 IO’s per second.

Image

Hard drives offer reduced file access rates due to the older file storage space and accessibility technique they are employing. And they also display considerably reduced random I/O performance in comparison to SSD drives.

Throughout our lab tests, HDD drives handled around 400 IO operations per second.

3. Reliability

Image

SSD drives are created to include as fewer rotating parts as is possible. They use a comparable technology to the one utilized in flash drives and are much more dependable in comparison with regular HDD drives.

SSDs come with an typical failing rate of 0.5%.

Image

HDD drives employ rotating hard disks for storing and reading data – a technology since the 1950s. Along with disks magnetically hanging in mid–air, spinning at 7200 rpm, the odds of some thing failing are generally higher.

The normal rate of failing of HDD drives can vary among 2% and 5%.

4. Energy Conservation

Image

SSD drives are far smaller than HDD drives as well as they don’t have just about any moving parts whatsoever. It means that they don’t create as much heat and need less energy to function and less power for cooling down reasons.

SSDs consume between 2 and 5 watts.

Image

From the moment they have been developed, HDDs were always quite power–heavy devices. When you have a web server with several HDD drives, this tends to raise the regular monthly electricity bill.

Normally, HDDs consume somewhere between 6 and 15 watts.

5. CPU Power

Image

SSD drives enable faster data access rates, which generally, in return, permit the processor to complete file calls faster and to return to additional tasks.

The average I/O hold out for SSD drives is just 1%.

Image

As compared to SSDs, HDDs permit slower file accessibility speeds. The CPU must wait for the HDD to send back the required data, saving its assets while waiting.

The typical I/O delay for HDD drives is approximately 7%.

6.Input/Output Request Times

Image

It’s time for several real–world cases. We produced a complete platform backup with a hosting server using only SSDs for data storage uses. During that procedure, the average service time for an I/O call remained beneath 20 ms.

Image

With the exact same server, however this time loaded with HDDs, the results were totally different. The common service time for any I/O call changed in between 400 and 500 ms.

7. Backup Rates

Image

Discussing backups and SSDs – we’ve detected a substantual development in the back up speed as we turned to SSDs. Today, a standard web server data backup requires just 6 hours.

Image

In contrast, on a server with HDD drives, an identical back–up could take 3 to 4 times as long to complete. An entire back–up of an HDD–driven web server often takes 20 to 24 hours.

Our Linux cloud website hosting packages accounts feature SSD drives automatically. Be a part of our family here, at Info-Vision, to see how we can assist you improve your website.

  • Service guarantees

  •  
  • Each one of our Virtual Private Servers is installed for you 100% free. 99.9% network uptime. Full root/administrator access.

  • Compare our prices

  •  
  • Preview the allocations and features offered by our Virtual Private Servers. You could start off with a cheaper VPS server and upgrade with just a mouse click as your demands increase.
  • Compare our hosting plans

  • Contact Us

  •  
  • It is easy to get in touch with us day and night by email or by utilizing our ultra–fast ticketing platform. Info-Vision provides a 1–hour reply–back time frame warranty.